BFT Gate Opener Repair in Plano and Frisco
BFT makes swing and slide gate operators found on homes and smaller commercial gates around south Collin County. Like most modern operators, they depend on correct force settings and working safety devices.
Open 24 hours, 7 days a week

Common trouble with BFT swing and slide gate operators
Stops partway and backs up
Most current operators reverse when they feel resistance or a safety input trips, and some lock out after two hits in a row. The real cause is often a hinge, roller or photo eye rather than the operator.
Opens fine, will not close
Closing is where safety devices get the final say. A dirty or bumped photo eye, a pressed edge or an exit loop that sees a phantom car will hold the gate open.
Dead after a storm
Lightning and power blips can take out a fuse, a surge part or a board input. A battery that ran flat during an outage can also leave an operator dark.
Grinding or clunking in the housing
Worn gears, a loose drive sprocket or an arm pivot worn oval all make noise before they fail outright.
What to have ready when you call
Look for the label on the operator, usually on the side of the housing or inside the cover, and read us the brand, model and serial number. It also helps to know:
- Whether the gate swings or slides, and whether it has one leaf or two
- Any lights, beeps or display codes on the operator
- Whether the gate moves freely by hand with the operator released
- When it started and whether a storm or outage came first
See also: gate opener repair, safety sensor and loop repair and emergency gate repair.
BFT gate questions
My BFT gate stops at the same spot every time. Why?
A repeat stop point usually means the gate meets resistance there, such as a high spot in the drive, a binding hinge or a bump in the track, or a limit setting has drifted. We check the gate by hand first.
Do you work on BFT gates in Plano and Frisco?
Yes. We repair BFT equipment in Plano, Frisco, Richardson, Murphy, Wylie, Parker and Sachse, around the clock. Call (469) 393-4388 for pricing on your gate, and ask about current discounts.
Are you a BFT dealer?
No. Collin Gate Repair is an independent repair company with no affiliation to BFT. We work on the equipment already on your gate.
BFT is a trademark of its owner. Collin Gate Repair is an independent repair company, not affiliated with or endorsed by any manufacturer.
BFT gate down? Call us.
Open 24 hours, 7 days a week. Call for pricing. Ask about current discounts when you call.