Gate Opener and New Driveway Gate Installation
Whether you want to automate the gate you already have, replace an opener that is past repair or add a new driveway gate, we plan the install around your gate, your power and how you use the driveway.
Open 24 hours, 7 days a week

Symptoms to watch for
Tired of getting out of the car
Opening a manual driveway gate by hand in July heat or a spring downpour is the most common reason homeowners ask about automation.
Old opener past sensible repair
When parts are no longer made for your model or several major parts have failed together, a new operator can cost less over time than repeat repairs.
Opener too small for the gate
An operator undersized for a heavy or wide gate strains, runs hot and wears out early. Matching the operator to the gate fixes the cause.
No gate yet
A new pool, a new fence, more privacy or a safe place for kids and dogs to play often leads to a new driveway gate.
Manual to automatic gate conversion
Plenty of gates in Plano, Frisco, Murphy and Parker were hung as manual gates, and the owners later decide to automate them. Before we quote a conversion, we check whether the gate is ready for it. A gate that sags, drags or binds will fight a new operator from day one, so the hinges, posts and frame need to be sound first. On a swing gate we look at the hinge side, the swing path and the slope of the drive. On a slide gate we check the track, the rollers and the room beside the opening.
Then we choose an operator sized for the gate weight, width and how often it will cycle. A gate that opens a few times a day for one family needs a different operator than a community entrance or a business gate that runs from morning to night.
- Automatic swing gate installation for single and double swing gates
- Automatic sliding gate installation and cantilever gate operators
- Swing gate opener replacement and slide gate opener replacement
- Solar gate opener installation for gates far from power
- Battery backup so the gate keeps running through an outage
Power, concrete and wiring
Every opener needs power and a solid mount. Slide operators usually sit on a concrete pad, and we pour or replace operator pads as part of the install. Low-voltage control wiring, photo-eye wiring and loop wiring run in conduit, which can mean trenching across a lawn or cutting a channel in concrete.
If your gate needs a new line-voltage circuit run from the house, a licensed electrician handles that circuit. We plan the gate side of the job so the electrician knows exactly where power is needed. On larger lots, such as in Parker, or at the end of a long driveway, a solar setup with a properly sized panel and battery can avoid a long trench altogether.
- Operator concrete pad installation
- Underground conduit trenching and low-voltage wiring
- Loop saw cutting for free-exit and safety loops
- Photo eyes and safety edges set up during the install
New driveway gate installation
If you do not have a gate yet, or the old one is beyond repair, we install new residential driveway gates, pedestrian gates and side gates, with posts and footings set for the weight they will carry. Swing, slide and cantilever gates each suit different driveways. Swing gates need clear room to open and do best on a level approach. Slide gates need space alongside the drive. Cantilever gates skip the ground track, which helps where the drive is uneven or collects debris.
Many neighborhoods in our area have HOA rules on gate height, style and color. Get your design approved before work begins; we can provide the gate and opener details the board usually asks for. Ranch-style entrances and farm gates on acreage near Parker and Wylie can be automated as well, often with solar power.
Commercial and community gate installation
We also install openers and gates at businesses, apartment communities, self-storage lots and HOA entrances, including high-cycle operators built for heavy daily use and parking barrier arms for lots. These jobs need a careful look at traffic flow, exit loops and safety devices, so we walk the site with you before recommending equipment.
Safety set up from the start
An automatic gate is a heavy machine moving across a driveway where people walk. Each opener we install is set up with the entrapment protection it calls for: photo eyes, safety edges or both, correctly set force and limits, and warning signs. We test that the gate stops and reverses before we hand over the remotes, and we show you how to use the manual release.
What changes the price
Installation pricing depends on the gate, the operator, the distance to power, how much concrete and trenching is needed and whether you want solar, loops or extra safety devices. Call for pricing on your project and ask about current discounts when you call. We explain the options and the cost before any work starts.
Quick checks you can do safely
- Measure the gate width and note whether it swings or slides.
- Open the gate by hand and see whether it moves freely without dragging.
- Find the nearest outlet or power source and estimate how far it is from the gate.
- Take a photo of the gate, posts and driveway to help describe it on the call.
- If you are adding a new gate, check your HOA rules first.
Keep everyone clear
Until a new opener is fully installed and tested, treat the gate as manual. Once it is running, keep children from playing near the gate and keep remotes out of their reach.
Common questions
Can my existing manual gate be automated?
Often, yes, if the gate swings or rolls freely and the posts and hinges are sound. If they are not, we fix those first so the new opener is not fighting the gate.
Do I need an electrician to install a gate opener?
Many openers run on low voltage from a transformer plugged into an existing outlet, or on solar. If a new line-voltage circuit is needed, a licensed electrician handles that part, and we coordinate the gate side.
Is a solar gate opener a good choice?
It can be, especially on long driveways and larger lots where running power is costly. The panel and battery need to be sized for how often the gate cycles and placed where they get good sun.
Should I choose a swing gate or a sliding gate?
It depends on the driveway. Swing gates need room to open and prefer a level approach, while slide gates need space beside the opening. We look at the site and explain the tradeoffs.
How much does a gate opener installation cost?
It depends on the gate, the operator, power and how much concrete or trenching is needed. Call (469) 393-4388 for pricing and ask about current discounts.
You may also need
- Gate Opener RepairMotors, gearboxes, boards and batteries inside swing arm and slide gate operators.
- Safety Sensor & Loop RepairPhoto eyes, safety edges, exit and safety loops, and loop detectors on automatic gates.
- Gate Post & Hinge RepairLeaning and rusted posts, concrete footings, hinges, latches and drop rods on driveway and side-yard gates.
Gate Opener Installation in Plano, Frisco and nearby
Open 24 hours, 7 days a week. Call for pricing. Ask about current discounts when you call.