Skip to content
CollinGate Repair · 24/7

Gate Keypad and Remote Repair

If the gate itself runs but your keypad or remote will not open it, the fault is usually in the device, its wiring or the receiver. This page covers those keypads and remotes.

Open 24 hours, 7 days a week

Gloved hand pressing a stainless gate keypad while holding a gate remote

Symptoms to watch for

Keypads on the post

A gate keypad sits outdoors through summer heat, hail and driving rain. Moisture creeps in around the buttons, ants nest behind the faceplate, and string trimmers nick the cable at the base of the post. We open the keypad, check its supply and output, and trace the wire back to the operator.

Remotes and receivers

Before anything else, change the battery in the remote. If that does not help, the receiver may have lost its memory after a surge, or the antenna may be loose. We test the receiver, reprogram working remotes and add compatible new ones.

Older remotes sometimes cannot be matched to a newer receiver. If yours is one of those, we explain the options for replacing remotes and receiver together.

Codes after a reset

Many keypads keep their codes in memory that survives a power loss, but a surge or a dead backup battery can wipe them. When every code stops working at once, the keypad may simply need its codes entered again. We confirm the keypad is healthy first, then help you restore the codes you use. Keep a written list of codes somewhere safe so this goes quickly.

In the heat of a Plano summer, a keypad facing west can get very hot by late afternoon. Faded or sticky buttons and a cracked faceplate are signs that the unit is near the end of its life.

What this page covers

This service is limited to keypads and handheld remotes whose job is to open the gate, along with the receiver and wiring that connect them to the operator. If you are not sure whether your device fits, describe it on the call and we will tell you.

Quick checks you can do safely

  • Replace the battery in your remote and try again.
  • Compare a spare remote with the keypad: if one works, the gate is probably fine.
  • Look for a cut or chewed wire at the base of the keypad post.
  • Note the brand on the keypad or receiver if you can see it.

Keep everyone clear

Turn off gate power before opening a keypad or receiver. Do not leave a keypad cover off in the rain.

Common questions

My remote stopped working. Is the gate broken?

Not necessarily. Try a fresh battery first. If the gate still opens from another remote or the keypad, the problem is with that remote or its programming.

Can extra remotes be added to my gate?

Yes, if they are compatible with your receiver. We can tell you which remotes will work.

The keypad beeps but the gate does not open. Why?

The keypad accepts the code but the command never arrives at the operator board. A damaged wire or a failed input on the board is the usual cause.

How much does keypad repair cost?

It depends on whether the keypad, wire or receiver failed. Call (469) 393-4388 for pricing, and ask about current discounts.

You may also need

Keypad & Remote Repair in Plano, Frisco and nearby

Open 24 hours, 7 days a week. Call for pricing. Ask about current discounts when you call.

Call nowRequest service