Skip to content
CollinGate Repair · 24/7

Gate Post and Hinge Repair in Plano and Frisco

A gate can only be as straight as the post it hangs on. When a post leans, a footing cracks or a hinge wears loose, we fix the support first so the gate closes square and stays that way.

Open 24 hours, 7 days a week

Wide double driveway gate on brick pillars, solar panel on one pillar, pecan trees beyond

Symptoms to watch for

Why gate posts lean in south Collin County

Much of Plano, Frisco, Murphy, Wylie and Sachse sits on clay soil that swells after a soaking rain and shrinks and cracks through a dry summer. A gate post set in that soil gets pushed and released season after season. A heavy driveway gate hanging off one side adds a steady sideways pull, so the post slowly tips toward the opening.

Shallow footings make it worse. A post set in a small collar of concrete, or in bagged mix poured around a post sitting on loose fill, has little to resist that pull. Sprinkler heads that spray the base of the post and downspouts that dump water next to it speed up both the soil movement and the rust.

Gate post repair and replacement

We start by working out why the post moved. Some posts can be straightened and reset: we dig out around the base, bring the post back to plumb and set it in a new, deeper concrete footing. Others are bent, rusted through or simply too light for the gate, and those need to be replaced.

When a post is replaced, we size it to the gate. A light pedestrian or side-yard gate may hang fine on a 4x4 steel post, while a wide driveway gate or a gate carrying an operator usually calls for a heavy-duty 6x6 steel post or larger. Wood posts can stay wood on light gates, but on heavier gates we will talk through a steel hinge post that still suits the look of the fence.

  • Leaning gate post repair, post straightening, post reset and alignment
  • Hinge post and latch post replacement
  • Steel, iron and wood gate post installation
  • Bent gate post repair after a bump from a car or trailer
  • Rusted gate post replacement and corrosion protection at the base
  • New concrete footings and foundation repair under existing posts
  • Driveway gate post installation and double swing gate post replacement

Masonry columns and posts bolted to a slab

Brick and stone columns are common on newer homes around west Plano and Frisco. The column looks solid, but a hinge is only as strong as what it is fastened to. Hinges lagged into veneer or mortar joints work loose over time. We look at whether there is a steel post, a filled core or only brick behind the hinge, and anchor the hinge into something that can carry the gate.

Posts bolted to a driveway with a base plate have their own weak spots: anchor bolts that loosen, plates that crack at the weld, and slab edges that chip away. We replace base plates and anchors, and add reinforcement welding where the post meets the plate when it needs support.

Gate hinge replacement and sagging hinge repair

Hinges take the weight and every swing of the gate. On most driveway gates the upper hinge carries the most pull and wears out first. We check each hinge for play, rust and cracked welds, then repair, realign or replace it and set the gate back to level.

The right hinge depends on the gate. Weld-on barrel hinges suit many steel gates. Ball-bearing hinges turn smoothly under heavy leaves and are a common upgrade on gates with an operator. Adjustable hinges let a gate be fine-tuned for level after it is hung. Some heavy gates ride on a pivot or bottom bearing that carries the weight from below, and those wear out too.

  • Broken hinge repair and sagging gate hinge repair
  • Heavy-duty, adjustable and ball-bearing hinge installation
  • Weld-on hinge replacement and hinge welding
  • Upper and lower hinge replacement and hinge bracket replacement
  • Gate pivot repair and gate bearing replacement
  • Hinge alignment and lubrication

Latches, drop rods and the hardware that holds a gate still

Small hardware does a lot of work. A drop rod or cane bolt keeps one leaf of a double gate planted. A gate stopper keeps the gate from swinging too far and twisting its hinges. Hold-open hardware keeps a manual gate from blowing shut while you pull a car through. We replace gate latches, gate lock hardware, drop rods, stops and hold-opens, and we can add anti-sag reinforcement, such as a diagonal brace, to a gate whose frame has started to rack.

If you live in an HOA neighborhood, check whether the association has rules on post material, color or column style before a post is replaced. We can describe what we plan to install so you can pass it along to the board.

What changes the price

Post and hinge work varies a lot. Swapping a hinge on an easy-to-reach gate is a much smaller job than replacing the hinge post on a double driveway gate with an operator mounted to it. Gate weight, post size, how much old concrete has to come out and whether welding is involved all change the number. Call for pricing on your gate and ask about current discounts when you call. We explain what we found and what it costs before the work begins.

Quick checks you can do safely

  • Stand back and compare the hinge post to a straight edge, such as a house corner: is it plumb?
  • Lift the free end of the gate slightly and watch the hinges for movement or gaps.
  • Look at the base of steel posts for rust, flaking or holes.
  • Check the footing for cracks or a gap between the concrete and the post.
  • Note whether sprinklers or downspouts soak the area around the post.

Keep everyone clear

A gate on a failing post or hinge can drop or tip over. Do not hang on it, lift it or let children swing on it. If an operator is attached, turn its power off and leave the gate where it sits until it is repaired.

Common questions

Is it better to straighten a leaning post or replace it?

Many posts can be straightened and reset in a new footing if the steel is still sound. Posts that are bent, rusted thin at the base or too small for the gate are better replaced. We tell you which one you have after looking at it.

Why does my gate keep sagging after the hinge was adjusted?

Because the hinge was not the real problem. If the post is leaning, the footing is moving or the hinge is anchored only in veneer, the gate will keep dropping. Fixing the support is what makes the adjustment last.

How big should the posts be for a driveway gate?

It depends on the weight and width of the gate and whether an operator is mounted on the post. Many heavy driveway gates need at least a 6x6 steel hinge post in a deep concrete footing. We size the post to the gate you have.

Do you replace hinges on wood and iron gates?

Yes. We replace hinges, latches and drop rods on wood, steel, iron and aluminum gates, including weld-on hinges on metal gates.

How much does gate post replacement cost?

It depends on the post size, the gate, how much old concrete has to come out and whether welding is needed. Call (469) 393-4388 for pricing and ask about current discounts.

You may also need

Gate Post & Hinge Repair in Plano, Frisco and nearby

Open 24 hours, 7 days a week. Call for pricing. Ask about current discounts when you call.

Call nowRequest service