Gate Welding and Bent Frame Repair
Metal gates tend to break at their joints. A cracked weld, a bent rail or a hinge torn off the frame can usually be repaired without buying a whole new gate.
Open 24 hours, 7 days a week

Symptoms to watch for
Cracked weld at a corner
A hairline crack where a rail meets an upright grows a little every time the gate moves. A rust line along a joint is often the first clue.
Frame racked out of square
A gate that has twisted or dropped at one corner will not close evenly. It rubs the post, misses the latch and pulls its operator out of line.
Bent after a car or a storm
A bumper, a trailer hitch or a hard gust against a closed gate can fold a rail, bend pickets or kink the bottom channel.
Bracket torn loose
Operator arm brackets, chain brackets and hinge plates take concentrated force and can break away from the frame while the rest of the gate looks fine.
Gate welding repair for steel, iron and aluminum
Most driveway and entrance gates around Plano and Frisco are steel or wrought-iron style tube steel, with more aluminum and steel-framed wood or slat gates showing up on newer homes. We repair the metal frame on all of these. Steel and iron are the most common welds. Aluminum takes a different welding process, and some thin or cast aluminum parts are better replaced than welded. We tell you which applies to your gate.
- Broken frame repair and frame welding
- Bent frame straightening
- Hinge welding and weld-on hinge replacement
- Operator bracket fabrication and support bracket welding
- Chain bracket and roller bracket welding on sliding gates
- Track welding and track section repair
- Picket replacement, crossbar replacement and panel replacement
Vehicle impact and storm damage repair
Driveway gates get hit. A delivery van backs up too far, a new driver misjudges the turn, or someone pushes through before the gate has finished opening. Storms do their share as well. A solid privacy gate or tall slat panel catches wind like a sail, and a strong gust against a latched gate can bend rails and snap welds.
After an impact we check more than the dent. The hinges, the post, the operator arm and its mount, and the track on a slide gate can all take part of the hit. Straightening the frame while a bent post or a cracked bracket goes unnoticed means the gate fails again. We follow the path of the force and repair in order.
If you plan to file an insurance claim, take photos before anything is moved, and ask us to describe the damage and the repair in writing.
Repairing the gate where it hangs
Many frame repairs, bracket welds and picket replacements can be done with the gate in place, which saves taking it down and rehanging it. When a gate is badly twisted or needs a lot of new material, it may come out straighter if it is taken off its hinges and worked on flat. We explain the plan before we start.
Welding near an operator takes care. We disconnect power and protect the board, wiring, battery, nearby plants and masonry from heat and spatter before any welding begins.
Rust repair, corrosion treatment and repainting
Rust usually starts where water sits: the bottom rail, the inside of hollow tube that was never capped, and joints where the paint has cracked. Surface rust can be cleaned and treated. Rust that has eaten through a rail or the foot of a picket needs that section cut out and new steel welded in.
Fresh welds and bare steel rust fast in humid spring weather, so repaired areas are cleaned, primed and painted. We match the existing color as closely as practical, though on an older faded gate a full repaint may look better than a patch. If your HOA sets gate colors, have the approved color handy.
Repair or replace the gate?
Welding repair makes sense when the frame is sound and the damage is local. If a gate is rusted through in many places, folded across its full width or built from material too light for its size, a new gate may cost less in the long run. We give you a straight answer, and if a new gate is the better path, we can install one. Call for pricing on either option and ask about current discounts.
Quick checks you can do safely
- Look along each joint for cracks, gaps or rust lines.
- Sight down the top rail to see whether it runs straight or bows.
- Check whether the gate still clears the drive and meets its latch or stop.
- If a vehicle hit the gate, look at the post, hinges and operator arm too.
- Take photos before moving anything.
Keep everyone clear
A gate with broken welds or a torn hinge can collapse without warning. Keep people and pets clear, turn off power to any operator, and do not try to force a bent gate open or closed.
Common questions
Can you weld a broken gate without taking it down?
Often, yes. Many frame cracks, hinge welds and bracket repairs can be done with the gate in place. A badly bent gate sometimes needs to come down so it can be straightened and welded flat.
Do you weld aluminum gates?
Many aluminum gate repairs are possible, but aluminum needs a different process than steel, and some thin or cast parts are better replaced. Describe the gate when you call and we will tell you what to expect.
My gate was hit by a car. Is it worth repairing?
Usually, if the frame is sound outside the damaged area. We check the post, hinges and operator as well, then tell you whether a repair or a new gate makes more sense.
Will the welded areas be painted?
Yes. Welded areas are cleaned, primed and painted to protect them from rust. Matching an older faded finish is not always exact, so we will talk through spot painting versus a full repaint.
What does gate welding repair cost?
It depends on the metal, how much damage there is, how much new material is needed and whether the gate has to come down. Call (469) 393-4388 for pricing and ask about current discounts.
You may also need
- Gate Post & Hinge RepairLeaning and rusted posts, concrete footings, hinges, latches and drop rods on driveway and side-yard gates.
- Swing Gate RepairHinges, posts, operator arms, stops and latches on single and double swing gates.
- Sliding Gate RepairRollers, V-track, guide wheels, gear rack and slide operators for heavy rolling gates.
Gate Welding & Frame Repair in Plano, Frisco and nearby
Open 24 hours, 7 days a week. Call for pricing. Ask about current discounts when you call.