Swing Gate Repair for Homes and Neighborhoods
Everything a swing gate weighs rides on a couple of hinges and a single post. When that support shifts, the gate sags, drags and starts wearing out its operator.
Open 24 hours, 7 days a week

Symptoms to watch for
The far end drags
The free end of the gate scraping concrete is the classic sign of a worn hinge or a post leaning toward the opening.
The two leaves miss each other
On a double gate, leaves that no longer meet in the middle or overlap unevenly usually mean one side has dropped.
Bangs open or shut
A missing stop or a loose arm lets the gate overtravel and slam, which damages hinges and welds over time.
Latch will not catch
A latch that used to line up and now misses is often the first visible sign that the gate has moved.
Hinges carry everything
Ball-bearing and barrel hinges wear with every swing. On heavy steel or wood-clad gates the top hinge takes most of the pull, and its pin or bearing usually goes first. We check each hinge for play, replace worn ones and set the gate back to level so it clears the ground through its full arc.
Posts and columns
Many newer homes in Plano and Frisco hang gates on masonry columns faced with stone or brick. If the hinge bolts were set only into the veneer, or the column footing has shifted, the gate will keep sagging no matter how many times the hinge is adjusted. We look at how the hinge is anchored before we decide how to fix it.
Steel posts set in concrete can also lean if the footing was shallow. Correcting a post is a bigger job than replacing a hinge, and we explain which of the two you have.
Wind and modern panel designs
Solid cedar, slatted aluminum and flat steel panels are popular on newer houses because they add privacy. They also behave like sails in a north Texas wind. A gust can push a closed gate against its operator arm or yank an open one past its stop. Strong stops, a well-mounted arm and a correctly set force limit keep that load off the hinges.
Manual swing gates too
Not every gate we see is automated. We also repair hand-operated driveway and side-yard gates: rehanging leaves, replacing hinges and latches, and adding gate stops and drop rods so the gate stays where you put it.
Quick checks you can do safely
- Open the gate slowly by hand and watch where it scrapes or binds.
- Look at the hinges for gaps, rust streaks or a pin that has worked loose.
- Check whether the post or column looks plumb next to the gate.
- Make sure nothing is wedged against the stops.
Keep everyone clear
A gate with a broken hinge can drop or swing unexpectedly. Prop it securely or keep the area clear, and do not hang on it to lift it back into place.
Common questions
Why does my swing gate sag?
Usually a worn top hinge, a hinge anchored only in veneer, or a post that has leaned. Fixing the support, not just raising the gate, is what makes the repair last.
Can you fix a double driveway gate that no longer lines up?
Yes. We level each leaf, adjust or replace hinges, and reset the stops and operator limits so both leaves meet properly.
Do you repair gates that are opened by hand?
Yes. We rehang manual swing gates and replace hinges, latches and stops.
How do I find out the cost?
Call (469) 393-4388. Call for pricing on your gate, and ask about current discounts when you call.
You may also need
- Gate Post & Hinge RepairLeaning and rusted posts, concrete footings, hinges, latches and drop rods on driveway and side-yard gates.
- Gate Welding & Frame RepairWelding, straightening and rebuilding for steel, iron and aluminum gate frames, brackets and pickets.
- Gate Opener RepairMotors, gearboxes, boards and batteries inside swing arm and slide gate operators.
Swing Gate Repair in Plano, Frisco and nearby
Open 24 hours, 7 days a week. Call for pricing. Ask about current discounts when you call.