Skip to content
CollinGate Repair · 24/7

Ditec Gate Opener Repair in Plano and Frisco

Ditec operators show up on automatic gates at homes and businesses in swing and slide styles. Diagnosis follows the same order as any operator: power, safety inputs, then the drive and the gate.

Open 24 hours, 7 days a week

Gloved hands adjusting a swing gate opener arm mounted on a stone column

Common trouble with Ditec swing and slide gate operators

  • Stops partway and backs up

    Most current operators reverse when they feel resistance or a safety input trips, and some lock out after two hits in a row. The real cause is often a hinge, roller or photo eye rather than the operator.

  • Opens fine, will not close

    Closing is where safety devices get the final say. A dirty or bumped photo eye, a pressed edge or an exit loop that sees a phantom car will hold the gate open.

  • Dead after a storm

    Lightning and power blips can take out a fuse, a surge part or a board input. A battery that ran flat during an outage can also leave an operator dark.

  • Grinding or clunking in the housing

    Worn gears, a loose drive sprocket or an arm pivot worn oval all make noise before they fail outright.

What to have ready when you call

Look for the label on the operator, usually on the side of the housing or inside the cover, and read us the brand, model and serial number. It also helps to know:

  • Whether the gate swings or slides, and whether it has one leaf or two
  • Any lights, beeps or display codes on the operator
  • Whether the gate moves freely by hand with the operator released
  • When it started and whether a storm or outage came first

See also: gate opener repair, safety sensor and loop repair and emergency gate repair.

Ditec gate questions

Our Ditec gate started reversing after the drive was resurfaced. Why?

Pavement work often cuts or disturbs vehicle loops and can bump photo eyes out of line. Either one can make a gate reverse or refuse to close.

Do you work on Ditec gates in Plano and Frisco?

Yes. We repair Ditec equipment in Plano, Frisco, Richardson, Murphy, Wylie, Parker and Sachse, around the clock. Call (469) 393-4388 for pricing on your gate, and ask about current discounts.

Are you a Ditec dealer?

No. Collin Gate Repair is an independent repair company with no affiliation to Ditec. We work on the equipment already on your gate.

Ditec is a trademark of its owner. Collin Gate Repair is an independent repair company, not affiliated with or endorsed by any manufacturer.

Ditec gate down? Call us.

Open 24 hours, 7 days a week. Call for pricing. Ask about current discounts when you call.

Call nowRequest service